Honeywell Demos Using Image View, Configuring ImageView on the Workstation, Click File Setup

Page 39

8

Using Image View

Overview

Image View is a software installed on the host workstation and receives data via wireless connection from the following Demos on the terminal:

•Imaging Demo

•IQ Imaging Demo

•Scan Demo

•Signature Capture Demo

Note: Contact your nearest Honeywell technical support office to retrieve the latest version of Image View.

Requirements

•Image View must be installed and configured on the host workstation.

•Both the Dolphin terminal and Image View on the host workstation must have the same IP address and TCP port.

Configuring ImageView on the Workstation

1.On the host workstation, click the ImageView.exe file and complete the installation process.

2.Click File > Setup.

3.In the IP Address field, enter the IP address of the host workstation.

4.Use the default Decode Port and Image Port for the host workstation.

5.Tap Apply. The network parameters are set.

6.Now, you need to configure the Demos on the terminal.

Dolphin® Demos User’s Guide	Rev A	8 - 1
	8/6/08

Image 39

Contents Dolphin Demos Other Trademarks DisclaimerTrademarks PatentsTable of Contents Signature Capture Demo System Requirements Installing and Accessing DemosAccessing Demos OverviewExiting Demos View OptionsTap File Exit ESC Upgrading Demos Acquiring Upgrades Installing an Upgrade to the WorkstationRev a Dolphin Demos User’s Guide Rev a Docs Installing an Upgrade on the TerminalFolder on the Workstation Device ImageInstall Locations Rev a Save Imaging DemoTo Capture Images To Save ImagesTap File Open Default Image SettingsTo Open Images Image ProfilesAuto Capture To Select a ProfileAvailable Image Profiles Menus File MenuImage Menu Shortcut Keys Setup MenuHelp Menu Menu Item Description AboutRev a IQ Imaging Demo To Use IQ Imaging DemoIQ Imaging Types Express Delivery Tap File Save Image or File Save Bar Code SettingsTo Save Scanned Information To Clear Scanned InformationRev a Print Demo Accessing the Print DemoTap Start Demos Print Demo Printing to a Bluetooth PrinterTo Run the Print Demo to a Bluetooth Printer RequirementsPrinting to an IrDA Printer RequirementsTo Run the Print Demo to an IrDA Printer Rev a Scan Demo To Use the Scan DemoScan Statistics Count Field This field displays … SymbolClearing Scan Data LengthCentering Auto Scan DelayAuto Scan Continuous ScanQuick Omni Aggressive Linear Decoding Enable AimerDecode Modes Sound OptionsAll SymbologiesTo Select Symbologies To De-Select SymbologiesDefault Settings Recording Custom SettingsTaking Images of Bar Codes To Capture a Signature Signature Capture DemoTap View Pen Width 1, 2, 3, or To Clear a SignaturePen Width Options Tap File SaveFor Optimal Functioning GPS DemoHeading Tab Activating the GPS DemoLogger Tab Satellites TabRaw Data Tab Rev a Using Image View Configuring ImageView on the WorkstationClick File Setup To Connect Demos on the Terminal to the Image View Scan Demo Send and AutoSendImaging Demo IQ Imaging DemoTo Transmit Demo Data to Image View Customer Support Technical AssistanceOnline Technical Assistance Rev a Page Honeywell