Metrologic Instruments TECH 10, 1070 manual Scanning bar codes, Labels

Page 11

LABELS

A label is inside the window of the scanner noting that this device is a CDRH Class IIA laser product and IEC 825 LASERKLASSE 1. Also, on the scanner is a label on the back of the unit. This label contains information such as the model number, date of manufacture, and serial number. The following are samples of the labels that are found on the unit.

Scanning bar codes

The depth of field for the scanner is 254 mm to 559 mm (10" to 22") from the scanner window. Pass the symbol through the scan area in order for the scanner to recognize the bar code.

Figure 3

7

Image 11
Contents November Page North America LocationsTable of Contents Introduction Scanner and AccessoriesScanner Connections to the Host Configuration of the Scanner to the Host System Parts of the Scanner Installation of the Stand Page Labels Scanning bar codesMaintenance Electrical SpecificationsAppendix a MechanicalEnvironmental OperationalPIN Function Pin Assignments for the Mil spec ConnectorAppendix B USA Corporate Headquarters Germany Limited WarrantyAppendix C Achtung Appendix DRemarque AtenciónStandard Europeo Attenzione Appendix D European StandardFunkstöreigenschaften nach EN Warnung Patents Appendix EIndex RMA