Metrologic Instruments 1070, TECH 10 manual Operational, Environmental

Page 14

APPENDIX A (CONTINUED)

Operational

 

Depth of Scan Field:

254 mm to 559 mm (10" to 22")

Scan Speed:

1,250 scan lines per second

Scan Pattern:

25 line omnidirectional

Exit Angle:

12° down off perpendicular of scan window

Indicators:

LED: red = good read; green = laser on

Beeper Operation:

Selection of 3 tones for “Good Read”

Maintenance Required:

Clean window periodically

Decode Capability:

Autodiscriminates

System Interfaces:

RS232C; Light Pen Emulation; OCIA; RS422

Print Contrast:

35% minimum reflectance difference

Roll, Pitch, Yaw:

360°, 60°, 60°

Environmental

 

Storage Temperature:

-40°C to 60°C (-40°F to 140°F)

Operating Temperature:

0°C to 35°C (32°F to 95°F)

Humidity:

5% to 95% relative humidity, non-condensing

Light Levels:

Up to 3200 foot candles - works in direct sun

Ventilation:

None required

Shock:

100 g for 1 ms

ESD:

8 kV IEC 801-2

Contaminants:

Protects against dust, falling dirt, and dripping non-corrosive liquid

Specifications subject to change without notice.

10

Image 14
Contents November Page Locations North AmericaTable of Contents Scanner and Accessories IntroductionScanner Connections to the Host Configuration of the Scanner to the Host System Parts of the Scanner Installation of the Stand Page Scanning bar codes LabelsMaintenance Mechanical SpecificationsAppendix a ElectricalOperational EnvironmentalPIN Function Pin Assignments for the Mil spec ConnectorAppendix B USA Corporate Headquarters Germany Limited WarrantyAppendix C Atención Appendix DRemarque AchtungStandard Europeo Attenzione Appendix D European StandardFunkstöreigenschaften nach EN Warnung Appendix E PatentsIndex RMA