Installation
Settings
| SETTING |
| DESCRIPTION |
|
|
| |
| Clock | Set date and time for the system. | |
|
|
| |
| Backlight ON Period | Set the duration for the keyboard/LCD backlight | |
|
|
|
|
| CPU Speed |
| Set CPU running speed. There are five speeds available: |
|
| Full speed, half speed, quarter speed, eighth speed and | |
|
|
| sixteenth speed. |
|
|
| Set time threshold for automatically power off when no |
| Auto Off |
| operation is taking place during that specified period. If this |
|
|
| value is set to zero, this function will be disabled. |
|
|
| There are two possible selections: Program Resume, which |
| Power On Options |
| starts from the program being used during the last session |
|
| before the last | |
|
|
| |
|
|
| with a new program. |
| Key Click |
| Select a tone for the beeper or disable the beeper when the |
|
| user presses a key button. | |
|
|
| |
| System Password |
| Set a password to protect the user from entering the system |
|
| menu. | |
|
|
| |
| Font |
| Current font displayed on the Optimus display |
|
|
|
|
| Reset to Default |
| Resets the system settings to the default settings |
|
|
|
|
DEFAULT
N/A
the light goes off after 20
seconds
Full speed
10 minutes
Program Resume
Enable
no password is set
System Font
N/A
Tests
The OptimusR has numerous tests available to the user for both operation and diagnostics. Depending on the application program that is in the active memory will determine which tests can be performed and are available to the user. The following table provides a description of the available tests.
SETTING | DESCRIPTION |
|
|
DEFAULTS
Reader
Buzzer
LCD & LED
Keyboard
Memory
Echo Test
To test the reading performance of the scanner. The following symbologies are enabled for the Reader test. All other symbologies will need to be enabled via programming.
Default Bar codes: Code 39, Industrial 25, Interleave 25,Codabar, Code 93, Code 128, UPCE, UPCE with ADDON 2, UPCE with ADDON 5, EAN8, EAN8 with ADDON 2 EAN8 with ADDON 5, EAN13, EAN13 with ADDON 2, EAN13 with ADDON 5
To test the buzzer with different Frequency/Duration. Press ENTER key to start and then press any key to stop the test.
To test LCD display and LED indicator. Press ENTER key to start and then press any key to stop the test.
To test the rubber keys. Press a key and the result will be shown on the LCD display. Note that the FN key should be used in conjunction with numeral keys.
To test the data memory (SRAM). Note after the test, the contents of the memory space will be wiped out.
Warning: This test erases any data stored in the terminal.
Echo Test is used to test the communication between the cradle and the PC. Perform Echo test from the host device that the cradle is connected.
14