Metrologic Instruments MS860i manual Installing the Scanner into a Counter

Page 15

Installing the Scanner into a Counter

Metrologic has designed three plates to accommodate in-counter installation of the scanner. Included automatically with the purchase of the scanner is Metrologic part #45471, Installation Plate. The universal and replacement plates are available at an extra charge. Contact the distributor, dealer or Metrologic to order one of these plates.

Metrologic Part Number 45471, Installation Plate:

This plate is designed for use in counters with no previous cut outs. No routing is necessary for a flush fit as the stainless steel top is only .60mm (.024") thick. The cut out measurements are 180.34mmL x 175.26mmW (7.1" x 6.9"). The final cut out must not be greater than 1.5mm (1/16") or less than the exact measurement. For easier installation, use the mounting template that accompanies this guide.

Metrologic Part Number 45474, Universal Plate:

This plate is designed to fit into an existing cut out up to 292.1mmL x 508mmW (11.5" x 20").

Metrologic Part Number 45470, Replacement Plate:

This plate is designed to fit into a cut out that previously contained an MS260 or MS362 scanner. This plate fits into the existing 293.62mmL x 245.36mmW (11.56" x 9.66") cut out.

11

Image 15

Contents Metrologic INSTRUMENTS, INC USA Corporate Headquarters Europe LocationsTable of Contents Appendix D Appendix aAppendix B Appendix CIntroduction Unpacking List Scanner Connections to the Host Configuration of the Scanner to the Host System Cloning Feature Version 11 IBM 46XX Scanner Configuring the MS860i-11 Scanner IBM 4684 and 4694 Systems Configuring the IBMPC Type Version 17 Keyboard Wedge ScannerConnection of a MS860i-17 Scanner to a PC Metrologic Part Number 45471, Installation Plate Installing the Scanner into a CounterAttaching the Vertical Stand to the Work Surface Touch Plate MS860i FeaturesPlaque de palpeur Touch PlatePiastra sensore Steady Green Visual IndicatorsNi la diode rouge, ni la diode verte nest allumée Signaux optiquesWeder rote noch grüne Leuchtdiodenanzeige Optische AnzeigenNé il diodo luminoso rosso né quello verde sono accesi Segnali otticiVolume Settings Labels Depth of Field Depth of Field and Symbol Specification See Figure Page Applications and Protocols MaintenanceElectrical SpecificationsAppendix a MechanicalEnvironmental OperationalAppendix B Default SettingsMecca DTS/SIEMENS DTS/NIXDORF NCR F NCR S Beep/Transmit Scanability Ocia IBM RTS/CTS Key Parallel Light Pin Function Appendix CEOT Version 2 Pin Assignments for Parallel CommunicationVersion 11 Pin Assignments for RS-485 Pin Function Version 3 Pin Assignments for Multi-drop RS-422 Version 26 Pin Assignments for RS-422 Appendix D Warranty and Disclaimer Limited WarrantyDisclaimer Remarque Appendix EAnmerkung Patents Appendix FVolume Control Card Page LED IndexMecca