Attaching the Vertical Stand to the Work Surface
With the Metrologic stand (Part #45472), there is a choice of four directions the scanner can be positioned for the scanner for greater flexibility. Figure 2 illustrates one direction that can be chosen. The stand requires a mounting space of 91.44mmL x 165.1mmW (3.6" x 6.5") to stabilize the stand. Since the arrow of the scanner in Figure 3 is pointing to the right, items must be presented to the scanner from left to right.
Figure 2
1.Drill four holes into the work surface that correspond with the holes in the 161.93mm x 85.73mm (6.38" x 3.38") base of the stand.(See Figure 3)
2.Screw the stand to the work surface with the four screws that are provided.
3.Place the scanner into the cradle of the stand.
(See Figure 4)
4.Align the two holes located on the back of the scanner with two holes on the stand.
5.Screw the scanner to the stand.
Figure 3
Figure 4
12