CBM1000 Service Manual
7. Removing the Tear Bar |
|
(1) Open the printer cover. | Printer Cover |
(2)Remove the tear bar from the printer cover SA by pulling it as shown in the
figure.
Note on reassembling:
When reassembling,
8.Removing the Operation Panel SA and Front Cover
(1)Remove the top cover.
(2)Remove the operation panel SA to the front by pushing its back.
(3)Remove the front cover.
Operation Panel SA
Tear Bar
Top Cover
Front Cover
9.Removing the Operation PCB Assy
(1)Remove the operation panel SA.
(2)Remove the one screw M2.6 × 6 (BT) and detach the operation PCB assy.
(3)Peel off the operation sheet from the operation panel.
M2.6×6 (BT)
Operation PCB Assy
Operation Sheet
Operation Panel
– 11 – | CITIZEN |