CBM1000 Service Manual
3. DISASSEMBLY AND REASSEMBLY
For maintenance operations, note the following:
Notes:
(1)Do not disassemble/reassemble or adjust the machine, if it functions properly. Particularly, do not loosen screws on any component, unless necessary.
(2)After completing an inspection and before turning on the power, be sure to check that there is no abnormality.
(3)During maintenance, be careful not to leave parts or screws unattached or loose inside the printer.
(4)When handling the thermal head or electronic component, do not use gloves or other aids which can easily cause static electricity.
(5)When disassembling or reassembling, check wires and cables for any damage. Do not run them into a narrow space or set them in improper positions.
(6)After reassembling, apply lubricant as required.
Maintenance Tools:
(1)Philips screwdrivers #1 and #2
(2)Tweezers
(3)Round nose pliers
(4)Cutting nipper
(5)Brush for lubrication
– 7 – | CITIZEN |