6.Installation
Insert the plug on the free end of the Communications Cable into the appropriate connector on the host as below described:
a. USB Connection
Host
b. PS/2 Connection
Host
Test Scanning
Do not hold the scanner directly over a barcode at 90˚. Scanning light bounces directly back into the scanner from the barcode label is known as specular reflection which will create a "dead zone" where decoding is difficult. So instead of a 90°
Maintenance
Cleaning the scan window is the only maintenance required. A dirty window may affect scanning accuracy.
Wipe the scanner window gently with a lens tissue or other material suitable for cleaning optical material.
4