Canon 800 manual Operation Keyboard optional

	Before You Begin...
!£ AF (Auto Focus) key	Used to automatically focus the image.
!¢ ZOOM (enlarge/reduce) key	Used to enlarge or reduce the size of the image projected
	on the screen. Press the ZOOM key and then use the
	control knob to enlarge and reduce the image on the screen.
FOCUS key	Adjusts the focus of the image projected on the screen.
	Press the FOCUS button and then turn the control knob
	until the image on the screen is in focus.
!§ ROTATE key	Rotates the image projected on the screen. Press the
	ROTATE key and then turn the control knob. The image
	rotates to match the rotation of the control knob.
!¶ Control knob	Turn this knob to adjust the image after the ZOOM, FO-
	CUS or ROTATE key has been pressed.

Operation Keyboard (optional)

P 2 P 3 P 4

!• Image adjust selection key !ª Image adjust mode indicators

Selects the image adjustment mode (zoom, focus or rotate).

These indicators show the image adjustment mode selected using key !•.

@º Image adjust control dial	After selecting the image adjustment mode, turn this dial to
	adjust the image.
@¡ Rotate key	Rotates the image 90° clockwise or counterclockwise.
@™ Film control knob	When a motorized carrier is installed, this knob feeds
	through the film. Turn the knob to the right to advance the
	film and to the left to rewind the film. (Note that this knob
	cannot be used with the FS Controller I or III.)
@£ RESET key	Restores the default settings for each setting mode.
@¢ Paper Select key	Selects the paper cassette or multipurpose tray in
	ReaderPrinter mode.
Disabled key	Not used by the MS800.

– 19 –