Optional Stand
An optional stand is available for the scanner which can be permanently attached to a wall or countertop. After locating the stand in an optimal position, the scanner (along with the stand) can be detached for portable use by lifting the entire unit as shown below.
Power Supply
Models require1 either a Listed class II or class III with a Limited Power Source (LPS). For the safety certification to be valid, class
IIIinput power sources must be
Input: 100 - 240 VAC | Output: 5 - 14 VDC (check scanner voltage option) |
Max. Current: 1 A | Max. Power: 14 W |
How to Scan
Bar codes can be presented to the scanner while it is resting on the counter or in the optional stand, or the scanner/mount can be lifted and held as shown.
Switch Option Shown |
*Optional Stand |
1. Power Off the Terminal (POT) units do not require a power supply.
2 | Magellan® 1000i |