Datalogic Scanning 1000I manual Quick Reference, Installation

Quick Reference

This guide is provided to help get your installation up-and-run- ning quickly and efficiently. For more details, including program- ming information, reference the Product Reference Guide (PRG), which is available for viewing and download from the Datalogic website listed on the back cover of this manual.

Installation

Route the interface cable from the terminal or host. Plug the AC adapter (if one is used) into a wall outlet and the interface (I/F) cable, then route and attach the I/F cable to the scanner. Verify operation by presenting known-good bar codes to the scanner. The unit should beep1 and/or flash its good read LED and send the bar code data to the host or terminal. If not, refer to the Trou- bleshooting section of this guide.

Scanner installation is complete.

Connect Here

I/F Cable	To Host/Terminal	For 220-230 VAC
		adapters, the
		cord must be
		facing down as
		shown in the
		illustration. If
		installed upwards,
	A/C Adapter	it will pose an
	(if needed)	undue strain on the
		socket outlet.

1.Beeper and LED behavior is selectable and may have been disabled by a previous user.

Quick Reference Guide 1