Datalogic Scanning 1000I manual Compliance Statement, LED Class

3.Verify that the interface cable is securely attached to the scan- ner.

4.Check that the bar codes are of sufficient quality to be recog- nized by the scanner. Wrinkled, smudged, or torn labels can

cause the scanner to not read at all. Scan known-good labels of an active symbology1 to check the scanner's read opera- tion.

5.Ensure that the scanner's interface type is compatible with the host terminal by consulting your POS system manual and/or the Product Reference Guide.

If the scanner still does not function properly, contact your local supplier or Datalogic Customer Support Services.

Compliance Statement

This device complies with Part 15 rules. Operation is subject to the following conditions:

1.This device may not cause harmful interference; and

2.This device must accept any interference received, including interference that may cause undesired operation.

This Class A digital apparatus complies with Canadian ICES -003.

Cet appareil numérique de la classe A est confrome à la norme NMB-003 du Canada.

LED Class

CLASS 1 LED PRODUCT	APPARECCHIO LED CLASSE 1
LED KLASSE 1	APPAREIL A LED DE CLASSE 1
	EN60825-1

1.Reading of the various bar code symbologies can be independently enabled or disabled in the scanner.

4 Magellan® 1000i