JB S72E.book Page 33 Tuesday, March 29, 2005 6:13 PM
3. Check the Microphone Boost checkbox and the click Close.
Start Recording
1.Click the New Recording button.
2.The dialog below will follow. Click to select an appropriate sample rate and channel for recording, and then click OK.
Playing Recorded Sound Clips
1.Click the Open Sound Clip button.
2.In the dialog that follows, browse to select the sound clip you wish to play and then click Open.
3.Click the Play button to start playing the selected sound clip. To pause playing, click the Pause button. To play the sound clip repeatedly, click the Repeat but- ton. To stop playing the sound clip, click the Stop button.
Selecting a higher sample rate and Stereo channel will result in higher quality recordings with larger files.
3.Click the Record button to start recording. To pause recording, click the Pause button. If you wish to activate the noise cancelling function, click the Noise Cancellation button. When activated, the line in the oscillograph will turn green.
4.To stop recording, click the Stop button. You can also click the Play button to listen to the sound you just recorded.
5.To save the recording, click the Save Recording button. Browse to an appropri- ate location, give the recording a name and then click Save.
Using the | 33 |