Compaq 1692, 1687, 1685, 1694 Preparing the Computer for Disassembly, Preparation for Disassembly

Page 14

Presario 1600 Series

Models: 1683, 1685, 1687, 1688, 1690, 1692, 1693, and 1694

Before You Begin

 

Specifications

 

Parts Catalog

 

 

 

 

 

 

 

 

 

 

Removal Sequence

 

Troubleshooting

 

Battery Operations

 

 

 

 

 

 

 

 

 

Index

Product Description

 

Pin Assignments

 

 

 

 

 

 

Before You Begin

Electrostatic

Discharge

Service

Considerations

Preparation for Disassembly

Preparing the Computer for Disassembly

1.Disconnect AC power and any external devices.

2.Remove the battery pack.

3.Remove any PC Cards.

IMPORTANT: The battery pack should be removed before performing any internal maintenance on the computer.

WARNING: Metal objects can damage the battery pack as well as the battery contacts in the battery compartment. To prevent damage, do not allow metal objects to touch the battery contacts. Place only the battery pack for the Compaq Presario Series Portable Computers into the battery compartment. Do not force the battery pack into the bay if insertion does not occur easily.

CAUTION: Do not crush, puncture, or incinerate the battery pack. Do not open a battery pack, as this damages the pack, makes it unusable, and exposes potentially harmful battery components. There are no field-serviceable parts located inside the battery pack.

The Compaq Presario Series Portable Computers have several screws of various sizes which are not interchangeable. Care must be taken

NOTE: during reassembly to ensure that the correct screws are used in their correct location. During removal please keep respective screws with their associated sub-assembly.

Image 14
Contents Index Product Description Pin AssignmentsIndex Serial Number Locating Additional InformationSystem I/O Address System InterruptsSystem DMA Parts Catalog Removal and Replacement IntroductionPost Disposal of a Used Battery Pack Increasing Battery Pack Operating TimeConditioning a Battery Pack Minimizing the Energy RequiredProduct Description Connector Pin Assignments Connector Pin SignalBefore You Begin Typical Electrostatic Voltages Electrostatic Electrostatic DischargeGenerating Static DischargeConsiderations Service ConsiderationsService Preparing the Computer for Disassembly Preparation for DisassemblyPart Description Spare Part Number Models 1692, 1693 Series CTO DescriptionDescription Spare Part Number System Unit System BoardsSystem Boards System Unit Display Assembly Display AssemblyMass Storage Devices Mass Storage Devices1d Touchpad each Cable Miscellaneous Cable KitMiscellaneous Cable Kit Description Quantity System Unit Miscellaneous Hardware KitMiscellaneous Hardware Kit Miscellaneous Plastics Kit Miscellaneous Plastics KitMiscellaneous Parts Miscellaneous PartsDocumentation and Software Documentation and SoftwareCables Cables and Connectors mainCables Connectors Select the Desired IllustrationRemoving a ZIF Cable Maintenance & service guideRemoval ZIF Connectors Cables and Connectors Hard Drive RibbonCompaq Presario Series DVD or CD Drive RibbonDiskette Drive Ribbon Speaker Cable Assembly Removal Removing the Battery Pack step To replace the battery pack, reverse the previous procedures Removing the Palmrest Cover with Touch Pad Palmrest Cover with Touch PadRemoving the Palmrest Cover with Touch Pad steps 4 Previous StepRemoving the Palmrest Cover with Touch Pad step Previous StepsRemoval Heatspreader Removal steps 1 HeatspreaderRemoval Heatspreader Removal step Removal Removing the Keyboard KeyboardRemoval Removing the Processor ProcessorRemoval Replacing the Processor Removing the ProcessorRemoving the Hard Drive steps 1 Hard DriveRemoval Removing the Hard Drive step Product Description Removal Removal of DVD or CD Drive DVD or CD DriveRemoval Removal of DVD or CD Drive step Return Removing the Battery Charger Board Battery Charger BoardRemoval Removing the Modem steps 1 ModemRemoval Removing the Modem step Removal Removing the Display Panel Assembly Display Panel AssemblyRemoving the Display Panel Assembly step Assembly hinge covers Before You Begin Specifications Steps 10 AssemblyRemoving the Display Panel Removal Removing the Upper CPU Cover Upper CPU CoverRemoving the Upper CPU Cover steps 8 Removal Removing the Speaker Assembly Speaker AssemblyFan Assembly System Board Dip Switch Settings Memory Module Removal Removing the Diskette DriveRemoval Fan Assembly Fan AssemblySpecifications Parts Catalog System Board Removing the System Board step System BoardPrevious Step Remove three screws from the system board Important from the system board Dip Switch Settings System boardComputer and/or system board Removal Memory Module Memory ModuleRemoving the Memory Module step ReturnPreliminary Steps Preliminary StepsPower-On Self Test Post Running PostComputer Checkup Test Preliminary Compaq DiagnosticsCompaq Diagnostics View System Information InspectContacting Compaq Support Contacting Compaq SupportShipping Preparation Hard Drive Test Error Codes Diagnostic Error CodesSolving Hard Drive Problems Solving Minor ProblemsSolving Audio Problems Solving Hardware Installation ProblemsModel 1687 Models and FeaturesHard Drive DVD or CD Modem System Memory Model 1690Models and Controls and Lights Controls LightsModels and Front Bezel Lights Front Bezel LightsModels and Front Bezel Buttons Front Bezel ButtonsModels and Left Side Components Left Side ComponentsModels and Right Side Components Right Side ComponentsModels and Underside of Unit Underside UnitRear Connectors Models and Rear ComponentsPow Power Management for WindowsPower Management Properties Display Properties