7.If it is necessary to replace the display panel:
a.Release the display panel cable (1) from the clips built into the bottom edge of the display enclosure.
b.Remove the four Phillips PM2.5×4.0 screws (2) that secure the display panel to the display enclosure.
c.Lift the top edge of the display panel (3), and then swing it up and forward until it rests upside down in front of the display enclosure.
d.Release the adhesive support strip (1) that secures the display panel cable to the display panel.
e.Detach the display panel cable (2) from the display panel. (The display panel cable is attached to the display panel with
Component replacement procedures | 71 |