20
VAIO Computer Reference Manual
AGP_INT Switch
You can enable or disable the onboard AGP interrupt.
To enable or disable the AGP_INT, perform the following steps:
1
2
Remove the system cover (see “Removing the System Cover” on page 24).
Set the switch to ON (Enable) or OFF (Disable). The default is ON (see also “Configuration Switches (SW)” on page 67).
O1 | 2 3 | 4 | 5 6 |
N |
|
|
|
SW |
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 |
O |
|
|
|
| ON |
N |
|
|
|
| |
|
|
|
|
| OFF |
AGP_INT switch
KY0093.VSD
3Reinstall the system cover (see “Replacing the System Cover” on page 25).