Sony PCV-L630 manual PCI Configuration Status and Error Messages, Message Meaning

88

VAIO Computer Reference Manual

PCI Configuration Status and Error Messages

The following is a list of status and error messages that may appear on your system from time to time.

Message	Meaning
Floppy Disk Controller	The diskette controller has requested a
Resource Conflict	resource that is already in use.
CMOS Checksum Error,	The CMOS data was reinitialized due to a
CMOS Cleared	CMOS checksum error.
CMOS Data Invalid,	Invalid entry in the CMOS.
CMOS Cleared
Parallel Port Resource Conflict	The parallel port has requested a resource
	that is already in use.
PCI Error Log is Full	This message is displayed when more than
	15 PCI conflict errors are detected. No
	additional PCI errors can be logged.
PCI I/O Port Conflict	Two devices requested the same resource,
	resulting in a conflict.
PCI IRQ Conflict	Two devices requested the same resource,
	resulting in a conflict.
PCI Memory Conflict	Two devices requested the same resource,
	resulting in a conflict.
Primary Boot Device Not	The designated primary boot device (hard
Found	disk drive, diskette drive, DVD-ROM drive,
	or network drive) could not be found.
Primary IDE Controller	The primary IDE controller has requested a
Resource Conflict	resource that is already in use.
Primary Input Device Not	The designated primary input device
Found	(keyboard, mouse, or other, if input is
	redirected) could not be found.
Primary Output Device Not	The designated primary output device
Found	(display, serial port, or other, if input is
	redirected) could not be found.
Secondary IDE Controller	The secondary IDE controller has requested
Resource Conflict	a resource that is already in use.
Serial Port 1 Resource Conflict	Serial port 1 has requested a resource that is
	already in use.