Removing, Installing, and Replacing Components
35
4Align the module over the appropriate socket, noting the location of pin 1 on the module and pin 1 on the socket.
Press down here
O 1 | 2 | 3 | 4 | 5 | 6 |
N |
|
|
|
|
|
Handles
Memory module (DIMM)
1 
Indicates pin 1
OM04586.VSD
5
6
Carefully but firmly insert the edge of the module into the socket.
Press down firmly and evenly at both corners until the module is fully seated.
✍When the module is fully seated, the handles on each side are straight up and locked into the slot on each side of the module. If the handles are not totally straight upright, continue to press down on each side of the module until the handles lock into place.
7Replace the system cover (see “Replacing the System Cover” on page 25).
Your computer automatically recognizes the extra memory and configures itself accordingly when you turn it on. No further action is required.