1Open the ejectors on the DRAM DIMM slots you want to use by pushing down on them.
2Align a DRAM DIMM in the DRAM slot as pictured and push the DIMM down until the ejectors snap into place.
Important Do not touch the DIMM’s connectors. Handle the DIMM only by the edges.
DRAM DIMM (Your DIMM’s shape and components may vary.)
The DRAM DIMM is designed to fit into the slot only one way. Be sure to align the notches in the DIMM with the small ribs inside the slot. With the ejectors in the open position (as shown), push down on the DIMM until it snaps into place. The ejectors will automatically close.
Ejector
(Your slot may have one or two ejectors. They should be pushed outward and down to be in the open position, as shown.)
Connectors | Notches | DRAM slot (1 of 3) |
|
| Ribs (inside slot) |
3Replace the computer core in the enclosure. (See “Replacing the Computer Core in the Enclosure” on page 68.)
Working Inside Your Computer | 65 |