Connecting to a
You can connect directly to a 10/100
You can also connect your computer to an Ethernet network that uses thin coaxial cables. To do this, you need an
See your
To connect your Macintosh to a centralized 10/100
1Plug one end of an
2Plug the other end of the cord into an
Ethernet hub or switch |
After you start up the computer, you need to configure the software for your network connection. Your network administrator can provide the necessary information. You can also get help configuring your network software using Mac Help (in the Help menu).
For More Information on Using Ethernet
Additional information, including setting up an Ethernet network or transferring files using Ethernet, is available in Mac Help. Choose Mac Help from the Help menu and search for “Ethernet” or “network.”
For information on networking products you can use with your computer, go to the Macintosh Products Guide at www.apple.com/guide
54 Chapter 3