USB playback

Chapter 5

USB playback

Using the USB interface

It is possible to listen to two-channel audio1 and watch JPEG files using the USB interface on the front of this unit. Connect a USB mass storage device2 as shown below.

1With the player switched on, press USB. Make sure your TV is on and set to the correct video input.

2Connect your USB device.

The USB terminal is located on the front panel.

USB

(Type A)

USB mass storage device

3Press (play) to start playback. If your USB device contains JPEGs, a slideshow will start. See Playing a JPEG slideshow on page 26 for more on this.

Make sure USB DATA is showing in the front panel display (or the system is in standby) when disconnecting.

05

 

 

 

 

 

English

 

Important

 

 

 

 

 

 

 

Deutsch

USB device are too high for this player, or that

 

If a USB ERR message lights in the display, it

 

 

may mean that the power requirements of the

 

 

the device is incompatible. Try the following:

 

 

 

 

 

 

 

 

 

• Switch the player off, then on again.

Français

• Reconnecting the USB device with the

 

player switched off.

 

• Selecting to another input source (like

 

DVD/CD), then back to USB.

 

• Using a dedicated AC adapter (supplied

 

Italiano

with the device) for USB power.

 

If this doesn’t remedy the problem, it is likely

 

your USB device is incompatible.

 

 

 

 

 

 

 

 

 

 

 

 

 

Basic playback controls

 

 

Nederlands

 

 

The following table shows the basic controls

 

 

on the remote for USB playback.

 

 

 

 

 

 

Button

What it does

 

 

 

 

 

 

 

 

 

 

Starts normal playback.

Español

 

 

 

 

 

Pauses/unpauses playback.

 

 

 

 

 

Stops playback.

 

Press to start fast reverse scanning.

Press to start fast forward scanning.

Skips to the start of the current file, then previous files.

Skips to the next file.

Note

1 This includes playback of WMA/MP3/MPEG-4 AAC files (except files with copy-protection or restricted playback).

2• Compatible USB devices include external magnetic hard drives, portable flash memory (particularly keydrives) and digital audio players (MP3 players) of format FAT16/32. It is not possible to connect this unit to a personal computer for USB playback.

Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no responsibility for any loss of data that may occur when connected to this unit.

With large amounts of data, it may take longer for the system to read the contents of a USB device.

25

En

Page 25
Image 25
Pioneer XV-DV373, HTZ373DVD, HTZ777DVD, XV-DV777 USB playback Chapter, Using the USB interface, Basic playback controls