Pioneer XV-DV373, HTZ373DVD, XV-DV777 Additional information Chapter, Optional system settings

Additional information

Chapter 10

Additional information

10

English

Optional system settings

All the available settings in the standby setup menu are listed below. See the notes in each section for more information about the settings. The first setting in each section is the default.

1Switch the system into standby.

2Press SHIFT+SETUP and use / then

ENTER to choose the setting you want to adjust.

The available settings are shown in the front panel display.1

3Use / to adjust then press ENTER to confirm and exit.

System demo setting

Switches the automatic demo feature on or off (this starts when you plug in for the first time):

•DEMO ON – Switches the demo feature on.

•DEMO OFF – Switches the demo feature off.

Frequency step setting

If you find that you can’t tune into stations successfully, the frequency step may not be suitable for your country/region.

•AM 9K

•AM 10K

•After using / to choose TV SYS (step 2 above), press ENTER to change the TV system as follows:

•AUTO  NTSC

•NTSC  PAL

•PAL  AUTO

The system automatically switches on and you’ll see the new TV system setting in the display after seeing WELCOME.3

		Player setting
Media Type	Format	NTSC	PAL	AUTO
DVD/Super VCD/	NTSC	NTSC	PAL	NTSC
Video CD/DivX	PAL	NTSC	PAL	PAL
Video/WMV
CD/MP3/WMV/	—	NTSC	PAL	NTSC or
MPEG-4 AAC/				PAL
JPEG/no disc

DTS CD setting

If you play a DTS-encoded CD, you will need to change this setting to hear the decoded signal.

•NORMAL – Regular CD playback; some DTS-encoded CDs output a noisy signal.

•DTS-CD– Proper decoding of DTS- encoded CDs; the beginning of regular CD tracks may be skipped.

Deutsch Français Italiano Nederlands Español

TV system setting Key lock setting

The default setting of this system is AUTO, and unless you notice that the picture is distorted when playing some discs, you should leave it set to AUTO. If you find picture distortion with some discs, set the TV system to match your country or region’s system. However, this may restrict the kinds of disc you can watch. See the table for the kinds of discs compatible with each setting (AUTO, PAL and NTSC).2

•LOCK ON – Makes the front panel buttons and controls inoperative.

•LOCK OFF – Restores regular use of the front panel buttons and controls.

Note

1 The setup menu is exited automatically after 5 minutes of inactivity.

2Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without color. If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV has a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at the top and bottom of the screen.

3 You have to switch the player into standby (press  STANDBY/ON) before each change.

37

En