Setting the Time and Date

Initializing and Testing the System

5 .

6 .

Perform a frigid start:

This step ensures that all system programming is returned to default values.

To upgrade to Release 1.1, Use the System Erase function on the SPM Maintenance menu (Maintenance → Slot → 00 → Demand Test → System Erase).

To upgrade to Release 2.0, use the System Erase function:

Maintenance → Slot → 00 → Demand Test → System Erase (Line 5, left button) twice → Yes

See the Maintenance and Troubleshooting guide for additional information on System Erase.

Restore from a Release 2.0 system programming diskette as described earlier in this chapter under “Restoring from the System Programming Diskette.”

7 . Program new features, if necessary.

See the System Programming guide for detailed procedures on programming.

8 . Replace the control unit housing when finished upgrading.

See Chapter 2 for any additional instructions.

If the Control Unit Diagram indicates that the time and date should be set, do so before testing the system.

Quick-Reference Procedure

Menu → SysProg → System → Date → Drop → Dial current date → Enter

See one of the programming guides for any additional instructions.

Setting the Time and Date 7-9