AT&T Release 2.0 manual Systimax

Installing Telephones and Adjuncts

SYSTIMAX

SYSTIMAX is a wiring kit that contains all the hardware needed to build a cross-connect field between the control unit and the telephone jack.

CAUTION:

To avoid coupling power supply noise onto system wiring, allow at least 3 inches (7.62 cm) of clearance between the basic carrier’s power supply and any wiring or termination hardware located left of the control unit.

With each kit you can build up to 24 jacks. The maximum number of telephones on the system is 144, which would require six kits.

Hardware

Each kit includes the following:

■instructions and parts sheet

■template-full scale

■two 110AB1-100JP12 termination blocks with modular jacks

■one 110AB1-100FT field-terminated block

■110A1 wire troughs

■D-rings

■110P8A5B patch cords (4-pair)

■D8W cords

Connecting the Telephones to the Control Unit 3-53