AT&T Release 2.0 manual Testing the Dictation System Access

Initializing and Testing. the System

8.Test telephones that have been programmed for Night Service with Outward Restriction.

a.Pickup a handset on a restricted telephone and verify that outside calls are not allowed.

b.Using the password, make an outside call. i . Hang up the handset.

ii. Press the Recall button and dial the password.

NOTE:

On an MLX telephone without a programmed Recall button, press Feature and dial 775 and the password before picking up the handset.

iii.Pick up the handset and make an outside call.

iv.Verify that you have good two-way communication and hang up.

9.At the operator console, press the Night Service button again and verify that the Night Service LED turns off.

Testing the Dictation System Access

Place a call to verify that the dictation system access equipment can be accessed. If dictation equipment has not been installed, this feature cannot be tested.

1.At the test telephone, pickup the handset.

2.Dial the access code and the number associated with the dictation equipment.

Testing the System 7-27