ASSEMBLY

FINAL PREPARATION FOR OPERATION

Place operators safety and operation decals on the steering column and side counsel where they are clearly visible to the operator. These decals should be understood by each operator of the machine in conjunction with the safety and operation section of this book. The decals are to be maintaned in good condition as a reminder to the operator, and should be replaced if damaged.

Finally, all bosses, pins and pivot points will need to be greased as instructed in the maintenance section of this manual. The hydraulic reservoir can also be filled with the recommended fluid (see maintenance section) and the filter installed in the top of the tank. Double check all fittings and fasteners BEFORE starting tractor. Also secure any loose hoses together with zip ties and wrap with split hoses where friction may occur on the hoses.

BEFORE starting or operating the tractor you must read and understand the safety and operation sections of this manual completely.

BE SURE THE BALL VALVES ARE OPEN! Start tractor and allow instruments to stabilize. Using a piece of paper or cardboard as noted in the safety and maintenance sections, check all fittings and connections for hydraulic leaks.

If a leak is found, you must shut down the tractor, set the cutter on the ground. Before attempting to fix the leak, you must actuate the lift valve handles several times to relieve any pressure in the lines.

Before operating the mower, the cutter head and boom should be slowly moved throughout the full range of motion. Watch for any condition that would cause pinching or excess stress on the hoses. The steering and front axle travel should also be carefully moved through their full range of motion. If any condition occurs in which the hoses contact the tires, the steering and / or front axle travel may need to be limited as described in the tractor operators manual. This should also be done if the tires rub, or are extremely close to any other part of the mower such as the hydraulic tank or draft beam. This may include adding shims, or adjusting stop bolts in the tractor front to solve the problem. While checking motion, you should also check that the control circuits are connected according to the operators decal for the valve handles.

MOWER TESTING

Take the tractor to a place free of loose objects on the ground. Operate the cylinders through their full range of motion again, to clear the lines of air. Follow the instructions in the operation section to operate the mower. Vibration of the mower should be minimal at all times. After a 5 minute test run, the knife bolts should be retorqued and once again after the first few hours of operation.

If any parts of this assembly section, or any other section of this manual are not clearly understood you must contact your dealer or the address on the front of this manual for assistance!

Assembly Section 2-29

Page 34 Page 36
Page 35
Image 35
Tiger JD 62-6420 manual Assembly Final Preparation for Operation, Mower Testing
Page 34 Page 36

JD 62-6420 specifications

The Tiger JD 62-6420 is a powerful and versatile machine designed to meet the demands of various agricultural applications. With its robust construction and advanced technology, this model stands out in the contemporary market of agricultural equipment. Built with a focus on performance and efficiency, the Tiger JD 62-6420 is an essential tool for farmers looking to enhance productivity and streamline their operations.

One of the main features of the Tiger JD 62-6420 is its impressive engine. Equipped with a high-performance diesel engine, it provides exceptional horsepower, ensuring that the machine can tackle even the toughest field conditions. The engine is designed with fuel efficiency in mind, allowing operators to reduce operational costs while maintaining optimal power output. This balance of performance and efficiency is critical for agricultural tasks that require consistent and reliable power.

In terms of technology, the Tiger JD 62-6420 incorporates advanced digital controls that enhance the user experience. The intuitive interface allows operators to easily manage machine settings, monitor performance, and receive real-time data, optimizing daily operations. This technological integration not only improves efficiency but also helps in reducing the learning curve for new operators.

The tractor is also equipped with modern hydraulic systems that provide superior lifting capabilities, making it ideal for various attachments and implements. Whether it is plowing, cultivating, or hauling, the hydraulic system ensures smooth operation and the ability to perform multiple tasks effortlessly. This versatility is one of the defining characteristics of the Tiger JD 62-6420, allowing it to adapt to changing farming needs.

Durability is another critical aspect of the Tiger JD 62-6420. Built with high-quality materials, the tractor is designed to withstand the rigors of daily agricultural use. The chassis is engineered for stability and strength, enabling it to operate efficiently in uneven terrain. Its design prioritizes longevity, ensuring that farmers can depend on the Tiger JD 62-6420 for years to come without frequent maintenance issues.

Overall, the Tiger JD 62-6420 represents a blend of power, technology, and durability, making it a top choice for modern agricultural operations. With its innovative features and focus on performance, it stands as a testament to the advancements in agricultural machinery, enabling farmers to achieve greater productivity while minimizing their environmental footprint. Whether for small farms or larger agricultural enterprises, the Tiger JD 62-6420 delivers reliability and efficiency.
Top Page Image Contents