Tiger JD 62-6420 manual Assembly Weather-Pack/Metri-Pack Assembly, Installing O-Ring Fittings

ASSEMBLY

WEATHER-PACK/METRI-PACK ASSEMBLY

These instructions apply to both Weather-Pack and Metri-pack connectors.

NOTE: Use the specific tool for the type of connector you are assembling.

1.Apply seal to cable, before stripping insulation.

3.Put terminal in crimping tool, then position wire and seal in place.

2. Align seal with cable insulation.

4.Crimp and visually inspect for a good crimp before installing in connector body.

INSTALLING O-RING FITTINGS

Installing straight, 45° and 90° O-rings requires that the O-ring and washer be up against the swivel body. Insert the swivel and turn in until the swivel is pointed in the desired direction and O-ring contact is made. Hold swivel in set direction with a wrench and turn the O-ring nut away from the swivel body and carefully tighten.

Assembly Section 2-5