ASSEMBLY

CABLE CONTROL LEVER STAND

On the corner cab post, mark a point at 1-3/8” from the windshield and 22 ½” from thefloor; then cut a ¾” diameter hole through the outer plastic shell. This will expose a threaded steel boss to attach the control box support bracket.

The rear corner of the cable control stand is placed approximately 5 ¾” from the edge of the mat. The front edge of the stand is up against the corner cab post and the door sill lip of the mat. Before you mark or drill any holes, check for support plates or wires under the mat & the cab floor. NOTE: Cutting into plates or wires makes more work for everyone and could be dangerous. When you know where the wires/plates lie, mark one of the mounting holes. Drill

a3/8” hole through the mat and through the floor of the cab. Next, lift the mat up and mark the other two holes on the cab floor. Drill the holes through the floor. Mark the mat and drill the other two 3/8” holes. Use a 1” hole saw and cut a 1” hole through the mat

over each 3/8” hole. Secure the stand to the floor with the spacers, capscrews and nylock nuts provided.

Cut a 1 ¾” hole in the floor to route the cables and wires through. It needs to have a ¼” clearance for the trim lock. Before you mark or drill any holes, check for support plates or wires under the cab floor.

NOTE: Cutting into plates or wires makes more work for everyone and could be dangerous. Look under the floor for cables and plates that you need to avoid. The hole should be approximately 4 ½” from the door sill and 4 ¾” from the lip of the mat under the console. Install the trim lock around the metal edges of the hole, then route the control cables and wires through the hole.

Next, wrap the cables with the 6” split hose at

the point they pass through the hole, and secure the zip-ties. Apply RTV sealer in and around individual cables and split hose, inside and outside of the cab for a water tight seal. Install upper support bracket from cab post to the control lever stand.

Assembly Section 2-8

Page 14
Image 14
Tiger JD 62-6420 manual Assembly Cable Control Lever Stand

JD 62-6420 specifications

The Tiger JD 62-6420 is a powerful and versatile machine designed to meet the demands of various agricultural applications. With its robust construction and advanced technology, this model stands out in the contemporary market of agricultural equipment. Built with a focus on performance and efficiency, the Tiger JD 62-6420 is an essential tool for farmers looking to enhance productivity and streamline their operations.

One of the main features of the Tiger JD 62-6420 is its impressive engine. Equipped with a high-performance diesel engine, it provides exceptional horsepower, ensuring that the machine can tackle even the toughest field conditions. The engine is designed with fuel efficiency in mind, allowing operators to reduce operational costs while maintaining optimal power output. This balance of performance and efficiency is critical for agricultural tasks that require consistent and reliable power.

In terms of technology, the Tiger JD 62-6420 incorporates advanced digital controls that enhance the user experience. The intuitive interface allows operators to easily manage machine settings, monitor performance, and receive real-time data, optimizing daily operations. This technological integration not only improves efficiency but also helps in reducing the learning curve for new operators.

The tractor is also equipped with modern hydraulic systems that provide superior lifting capabilities, making it ideal for various attachments and implements. Whether it is plowing, cultivating, or hauling, the hydraulic system ensures smooth operation and the ability to perform multiple tasks effortlessly. This versatility is one of the defining characteristics of the Tiger JD 62-6420, allowing it to adapt to changing farming needs.

Durability is another critical aspect of the Tiger JD 62-6420. Built with high-quality materials, the tractor is designed to withstand the rigors of daily agricultural use. The chassis is engineered for stability and strength, enabling it to operate efficiently in uneven terrain. Its design prioritizes longevity, ensuring that farmers can depend on the Tiger JD 62-6420 for years to come without frequent maintenance issues.

Overall, the Tiger JD 62-6420 represents a blend of power, technology, and durability, making it a top choice for modern agricultural operations. With its innovative features and focus on performance, it stands as a testament to the advancements in agricultural machinery, enabling farmers to achieve greater productivity while minimizing their environmental footprint. Whether for small farms or larger agricultural enterprises, the Tiger JD 62-6420 delivers reliability and efficiency.