(SG-4)

OPERATION - CLEAN CUTTER

Never operate the Tractor or Implement until you have read and completely understand this Manual, the Tractor Operator’s

DANGER! Manual, and each of the Safety Messages found in the Manual or on the Tractor and Implement. Learn how to stop the tractor engine suddenly in an emergency. Never allow inexperienced or untrained personnel to operate the Tractor and Implement without supervision. Make sure the operator has fully read and understood the manuals prior to operation.

OPERATING INSTRUCTIONS

Inspect clean cutter saw before each use. Re-torque spindle bolts to 204 Ft- lbs. Inspect blade around collar and near the teeth for bends and cracks. Check for loose, broken, chipped, dull of missing teeth. Tighten all loose teeth by hammering and or replacing rivets. If teeth are broken, chipped, or missing or if blade is cracked or becomes bent remove blade and have it repaired at an approved service center. Call Tiger Service Department for replacement parts and service.

The TRB50 Clean Cutter is intended for clean cutting trees and brush up to six

(6)inches in diameter maximum. Turn mower “ON” while tractor is running at idle RPM. Then increase tractor speed to 1,950 RPM maximum. Note, this tractor engine speed produces a mower speed of 1,500 RPM. DO NOT operate the clean cutter mower at speeds in exess of 1,500 RPM. If saw blade wobbles in exess of two (2) inches while tractor is idling, STOP, remove the blade and have it repaired an an approved service center. Call Tiger Service Department for replacement parts and service.

Allow saw to accelerate to maximum speed before moving into foliage. Advance mower head smoothly in foliage. Allow saw to cut through material, do not force or over feed. If saw slows excessively, move the head out of the foliage, and allow the saw to achieve maximum speed. DO NOT move up or down or roll mower head while cutting through heavy foliage. DO NOT use clean cutter mower on the ground. The saw blade is equipped with carbide tips, which are very hard. Striking rocks, steel, concerte, or other similar debris will break these tips.

Badly worn teeth increase stress to the saw blade and require more horsepower to cut than sharp teeth. Set-up a scheduled maintenance program for the saw before the teeth are dull. The saw will last longer, product a better cut, cut large diameter foliage without binding, and will cost less to operate.

Check adapter and collar every time saw is changed, maintain the .004 inch taper on face (surface against the saw blade) of these two (2) items. Always clean adapter and collar before mounting the blade. If adapter or collars are worn or damaged, they must be replaced.

Familiarize yourself with the machines operation and correct operating safety precautions.

Bengal Brute Common Section 6 - 69

Page 205
Image 205
Tiger JD 62-6420 manual Operation Clean Cutter, Operating Instructions

JD 62-6420 specifications

The Tiger JD 62-6420 is a powerful and versatile machine designed to meet the demands of various agricultural applications. With its robust construction and advanced technology, this model stands out in the contemporary market of agricultural equipment. Built with a focus on performance and efficiency, the Tiger JD 62-6420 is an essential tool for farmers looking to enhance productivity and streamline their operations.

One of the main features of the Tiger JD 62-6420 is its impressive engine. Equipped with a high-performance diesel engine, it provides exceptional horsepower, ensuring that the machine can tackle even the toughest field conditions. The engine is designed with fuel efficiency in mind, allowing operators to reduce operational costs while maintaining optimal power output. This balance of performance and efficiency is critical for agricultural tasks that require consistent and reliable power.

In terms of technology, the Tiger JD 62-6420 incorporates advanced digital controls that enhance the user experience. The intuitive interface allows operators to easily manage machine settings, monitor performance, and receive real-time data, optimizing daily operations. This technological integration not only improves efficiency but also helps in reducing the learning curve for new operators.

The tractor is also equipped with modern hydraulic systems that provide superior lifting capabilities, making it ideal for various attachments and implements. Whether it is plowing, cultivating, or hauling, the hydraulic system ensures smooth operation and the ability to perform multiple tasks effortlessly. This versatility is one of the defining characteristics of the Tiger JD 62-6420, allowing it to adapt to changing farming needs.

Durability is another critical aspect of the Tiger JD 62-6420. Built with high-quality materials, the tractor is designed to withstand the rigors of daily agricultural use. The chassis is engineered for stability and strength, enabling it to operate efficiently in uneven terrain. Its design prioritizes longevity, ensuring that farmers can depend on the Tiger JD 62-6420 for years to come without frequent maintenance issues.

Overall, the Tiger JD 62-6420 represents a blend of power, technology, and durability, making it a top choice for modern agricultural operations. With its innovative features and focus on performance, it stands as a testament to the advancements in agricultural machinery, enabling farmers to achieve greater productivity while minimizing their environmental footprint. Whether for small farms or larger agricultural enterprises, the Tiger JD 62-6420 delivers reliability and efficiency.