Tiger JD 62-6420 manual Tip Replacement Procedure Carbide Tip Replacement

TIP REPLACEMENT PROCEDURE

CARBIDE TIP REPLACEMENT

1.Heat face of tip to dull orange, remove tip, then brush tooth body clean of all debris (carbon).

2.Apply acetone to socket rail on tooth body and allow it to evaporate. Dab on soldering paste (black flux) to socket rail of tooth body and slide pre-tinned tip into place.

3.Then heat tip sides and base of socket rail to ensure silver solder flows completely around base of tip. Grasp tip with tweezers and gently twist tip back and forth to ensure complete bonding of silver solder

4.Discontinue heat, and allow to cool. Then check braze by gently tapping tip with rubber mallet.

Bengal Brute Common Section 6 - 73