OPERATION

63” BOOM FLAIL

The 63” boom flail mower was designed for cutting grass. The cutter shaft speed must be maintained for proper cutting. To insure that the cutter shaft is rotating at maximun speed, run tractor at full throttle during mowing operations. If cutter shaft slows to the point that the knives are folding back against the cutter shaft, move the mower head away from the foliage and allow the cutter shaft to regain full speed.

Operating the mower in a manner that allows the knives to contact

the drum will cause permanent damage to the cutter shaft drum, knives, and knife attachment parts.

The 63” boom flail cutter shaft is designed for standard rotation (same rotation as the tractor wheels during forward travel). Never operate the cutter shaft in reverse rotation. Operating this mower in reverse rotation may cause objects to be thrown out the front of the mower head.

UNSTOWING BOOM

To un-stow the boom from the boom rest, proceed as follows. Extend the

secondary boom “OUT” and lift the head off of the boom rest. Extend the knuckle boom “STRAIGHT”. Move main boom “UP” off of main boom support. Swivel boom “FORWARD” perpendicular to tractor and switch travel lock to “OFF”. The head and booms are now ready for full operation.

TRANSPORTING MOWER

Transporting under the units own power:

NOTE: ONLY when transporting under the units own power is it permissible to rest the head in any of the resting positions. When transporting on a trailer the head MUST be resting on the position designed for the head you are using.

When transporting between job sites, the following procedure should be followed: Shut off the power to the cutting head and allow all motion to come to a complete stop. Roll the mower deck “OUT” all the way until it is adjacent to the secondary boom. Extend the secondary boom “OUT” to clear the boom rest. Next, swivel the boom “AFT” and manuver the main boom until it rests on the boom rest. Switch over to the knuckle control and curl the knuckle “Back” fully. Slowly and carefully lower the secondary boom until it contacts the desired cradle. Lastly, place the “Travel Lock” switch on the main control switch box to the “ON” position. The unit is now ready for self transportation. (See picture of stowed boom on next page).

Operation Section 3-14

Page 75 Page 77
Page 76
Image 76
Tiger JD 62-6420 manual Operation Boom Flail, Unstowing Boom
Page 75 Page 77

JD 62-6420 specifications

The Tiger JD 62-6420 is a powerful and versatile machine designed to meet the demands of various agricultural applications. With its robust construction and advanced technology, this model stands out in the contemporary market of agricultural equipment. Built with a focus on performance and efficiency, the Tiger JD 62-6420 is an essential tool for farmers looking to enhance productivity and streamline their operations.

One of the main features of the Tiger JD 62-6420 is its impressive engine. Equipped with a high-performance diesel engine, it provides exceptional horsepower, ensuring that the machine can tackle even the toughest field conditions. The engine is designed with fuel efficiency in mind, allowing operators to reduce operational costs while maintaining optimal power output. This balance of performance and efficiency is critical for agricultural tasks that require consistent and reliable power.

In terms of technology, the Tiger JD 62-6420 incorporates advanced digital controls that enhance the user experience. The intuitive interface allows operators to easily manage machine settings, monitor performance, and receive real-time data, optimizing daily operations. This technological integration not only improves efficiency but also helps in reducing the learning curve for new operators.

The tractor is also equipped with modern hydraulic systems that provide superior lifting capabilities, making it ideal for various attachments and implements. Whether it is plowing, cultivating, or hauling, the hydraulic system ensures smooth operation and the ability to perform multiple tasks effortlessly. This versatility is one of the defining characteristics of the Tiger JD 62-6420, allowing it to adapt to changing farming needs.

Durability is another critical aspect of the Tiger JD 62-6420. Built with high-quality materials, the tractor is designed to withstand the rigors of daily agricultural use. The chassis is engineered for stability and strength, enabling it to operate efficiently in uneven terrain. Its design prioritizes longevity, ensuring that farmers can depend on the Tiger JD 62-6420 for years to come without frequent maintenance issues.

Overall, the Tiger JD 62-6420 represents a blend of power, technology, and durability, making it a top choice for modern agricultural operations. With its innovative features and focus on performance, it stands as a testament to the advancements in agricultural machinery, enabling farmers to achieve greater productivity while minimizing their environmental footprint. Whether for small farms or larger agricultural enterprises, the Tiger JD 62-6420 delivers reliability and efficiency.
Top Page Image Contents