Tiger JD 62-6420 manual The Spindle Assembly, Maintenance Heavy Duty Spindle Assembly

MAINTENANCE

HEAVY DUTY SPINDLE ASSEMBLY

INSTALLATION AND BEARING ADJUSTMENT

WARNING! A press MUST be used to install bearing cups, bearing cones, and seals. DO NOT use a hammer to install races, bearings, or seals. The parts of assembly may be damaged.

NOTE: The grease zerk and gussets are located on the top side of the spindle housing. Be sure the spindle is assembled correctly.

Be sure to wear eye protection and other protective equipment as needed when working on spindle assembly.

THE SPINDLE ASSEMBLY

See the diagram below for identification of spindle parts, while servicing.

Maintenance Section 4-22