AT&T Release 2.0 manual Removing the Jack Guard

Installing Telephones and Adjuncts

6.Replace the module cover.

a.If the module cover has a square jack guard that protects the TEL/OTHER jack area, grasp and twist the guard to remove it. See Figure 3-5.

NOTE:

Save the jack guard if you are wall mounting an MLX-10 or MLX-10D telephone.

MFM Jack Tab Cover

Figure 3-5. Removing the Jack Guard

b.There are locking tabs on both sides of the module cover and a screwpost on the right side of the telephone. Place the tab in the slot on the left side of the telephone.

Installing the Multi-Function Module 3-9