AT&T Release 2.0 manual Installing Applications

Installing Applications

Hardware Requirements

■MERLIN MAIL Voice Messaging System unit and power cords

■remote maintenance device (with a wall-mount transformer)

■modem cable with a 9-pin connector at one end and a 25-pin connector at the other end to connect the remote maintenance device to the serial port on the MERLIN MAIL Voice Messaging System unit

■D4BU modular cords (two for a 2-port system or four for a 4-port system, plus one for the remote maintenance device)

■012 basic telephone module

NOTE:

■Additional touch-tone receivers (TTRs) may be needed for the 012 module to handle a large number of voice connections.

■MERLIN MAIL Voice Messaging System connects to two or four 012 basic telephone module jacks on the control unit.

■The MERLIN MAIL Voice Messaging System unit can be desk- or wall-mounted and should be placed in an area with low humidity and proper ventilation.

■Follow the power and ground procedures for T/R telephones that require auxiliary power.

Installation Procedure

See the documentation indicated below for installation procedures.

8-26MERLIN MAIL Voice Messaging System