Initializing and Testing the System

3. At the called station, press Hold.

The line button’s green LED should flash,

4.Verify that music is heard at the calling telephone.

5.Hang up.

NOTE:

If you use equipment that rebroadcasts music or other copyrighted materials, you may be required to obtain a copyright license and pay license fees from a third party such as the American Society of Composers, Artists, and Producers (ASCAP) or Broadcast Music incorporated (BMI). Or you can purchase a Magic on Hold system, which does not require you to obtain such a license, from your authorized dealer.

Testing the PFT Jacks

To test a power failure transfer (PFT) jack for proper operation, the outside line numbers to the module’s trunk jacks must be assigned and the trunks must be operational. Also, a PFT telephone on a GS line must have a GS button (see Figure 7-1) attached to the telephone.

Figure 7-1. Ground-Start Button

Testing the System 7-29

Page 306
Image 306
AT&T Release 2.0 manual Testing the PFT Jacks, Ground-Start Button