Drilling Holes for Each Piece of Hardware

Installing Telephones and Adjuncts

4.Drill two diagonally opposite holes for each piece of hardware. You can drill right through the template. See Figure 3-30.

There is a 1/16-inch (1.6-mm) space between the outline of each piece of hardware; keep this space as you mount the hardware.

Figure 3-30. Drilling Holes for Each Piece of Hardware

5.Remove the template from the wall. Keep it in one piece so that you can check it for correct placement of hardware.

6.Mount the wire troughs and termination blocks on columns 1 and 3 as needed.

3-58Connecting the Telephones to the Control Unit