AT&T Release 2.0 manual Overview of the Installation Process

Introduction to Installation

Overview of the Installation Process

The following is a comprehensive list of everything that the system could include. When installing your customer’s system, try to adhere to this order as much as possible.

1.Install the control unit (required). See Chapter 2.

2.Connect power accessories to the control unit (optional). See Chapter 2.

3.Install the telephones (required) and adjuncts (optional). See Chapter 3.

4.Connect the telephones to the control unit (required). See Chapter 3.

5.Connect the control unit to the network interface (required). See Chapter 4.

6.Connect the channel service unit to the 100D module on the control unit (required only with the 100D module).

See Chapter 4.

7.Connect the printer and PC to the control unit (optional). See Chapter 5.

8.Connect data equipment to the control. unit (optional). See Chapter 6.

9.Initialize and test the system (required). See Chapter 7.

10.Install the control unit housing (required). See Chapter 7.

11.Install applications (optional). See Chapter 8.

1-2Overview of the Installation Process