Installing Telephones and Adjuncts

Assembling the MLX Telephone

If you are installing an MLX telephone, you need to assemble it prior to connecting it to the control unit. For all other telephones, skip to the next section, “Connecting the Telephones to the Control Unit.”

Before installing an MLX telephone or operator console, consider the following:

A 630B Phonemount (not included) is required to mount an MLX-10 or MLX-10D telephone to the wall.

MLX-20L and MLX-28D telephones cannot be wall-mounted.

To connect an adjunct, you must first have an MFM. (Adjuncts include answering machines, alerts, and fax machines. ) If you are installing an MFM, do it now by using the procedure in “Install the Multi-Function Module” earlier in this chapter.

MLX Telephone Installation Procedure

1.Remove or adjust the desk stand. See Figure 3-2earlier in this chapter.

NOTE:

MLX-20L and MLX-28D telephones cannot be wall-mounted.

If you have removed the stand to wall mount an MLX-10 or MLX-10D telephone, set the stand aside and go to Step 2.

3-36Assembling the MLX Telephone

Page 139
Image 139
AT&T Release 2.0 manual Assembling the MLX Telephone, MLX Telephone Installation Procedure