3-28
Cisco 7304 Router MIB Specifications Guide
OL-4925-02
Chapter3 MIB Specifications
CISCO-ENHANCED-MEMORY-POOL-MIB
CISCO-ENHANCED-MEMORY-POOL-MIBNote The CISCO-ENHANCED-MEMORY-POOL-MIB is not supported in this release.
The CISCO-ENHANCED-MEMORY-POOL-MIB (Table 3- 18) contains objects to monitor memory
pools on all physical entities on a managed system Memory utilization information is provided to users at
three different intervals of time: 1 minute, 5 minutes, and 10 minutes. Memory pools can be categorized into
two groups:
•Predefined pool types—Currently predefined as:
–
1:processor memory
–
2:i/o memory
–
3:pci memory
–
4:fast memory
–
5:multibus memory
•Dynamic pool types—Have a pool type value greater than any of the predefined types listed above.
Only the processor pool is required to be supported by all devices. Support for other pool types is
dependent on the device being managed. For detailed definitions of the
CISCO-ENHANCED-MEMORY-POOL-MIB objects, see the MIB.
Note CISCO-ENHANCED-MEMORY-POOL-MIB retrieves used and free information from sysdb namespace. If
mempool type is not found, it returns zero length to the SNMP core agent.
Note The OLD-CISCO-MEMORY-MIB contains objects that describe memory pools on devices running an
earlier implementation of the Cisco IOS operating system. This MIB was replaced by the
CISCO-MEMORY-POOL-MIB.
Table3-18 CISCO-ENHANCED-MEMORY-POOL-MIB Constraints
MIB Object Notes
ciscoMemoryPoolTable
•ciscoMemoryPoolLargestFree
•cempMemPoolPlatformMemory
•cempMemPoolLargestFree
•cempMemPoolLowestFree
Not supported.
ciscoMemoryPoolUtilizationTable Table not supported.