Cisco Systems 7304 manual Configuring the 2-Port and 4-Port T3/E3 SPAs, Configuration Tasks, 13-1

C H A P T E R 13

Configuring the 2-Port and 4-Port T3/E3 SPAs

This chapter provides information about configuring the 2-Port and 4-Port T3/E3 Shared Port Adapters (SPAs) on the Cisco 7304 router. It includes the following sections:

•Configuration Tasks, page 13-1

•Verifying the Interface Configuration, page 13-17

•Configuration Examples, page 13-19

For information about managing your system images and configuration files, refer to the Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 and Cisco IOS Configuration Fundamentals Command Reference, Release 12.2 publications.

For more information about the commands used in this chapter, see Chapter 18, “Command Reference,” in this guide, which documents new and modified commands. Also refer to the related Cisco IOS Release 12.2 software command reference and master index publications. For more information about accessing these publications, see the “Related Documentation” section on page -xivsection of this document.

Configuration Tasks

This section describes how to configure the 2-Port or 4-Port T3/E3 SPA for the Cisco 7304 router and includes information about verifying the configuration.

It includes the following topics:

•Required Configuration Tasks, page 13-2

•Specifying the Interface Address on a SPA, page 13-5

•Optional Configurations, page 13-5

•Saving the Configuration, page 13-17

Cisco 7304 Router Modular Services Card and Shared Port Adapter Software Configuration Guide

OL-4807-02 13-1