Cisco Systems 7304 manual Monitoring Per-Port Interface Statistics, 13-18

Chapter 13 Configuring the 2-Port and 4-Port T3/E3 SPAs

Verifying the Interface Configuration

Monitoring Per-Port Interface Statistics

To find detailed status and statistical information on a per-port basis for the 2-Port or 4-Port T3/E3 SPA, use the show controllers serial command. For a description of the command output, see Chapter 18, “Command Reference.”

The following example provides sample output for interface port 1 on the SPA located in the first subslot of the SIP that is installed in slot 5 of the Cisco 7304 router:

show controller serial 5/0/2 Serial5/0/2 -

Framing is c-bit, Clock Source is Line

Bandwidth limit is 44210, DSU mode 0, Cable length is 10 rx FEBE since last clear counter 0, since reset 0

Data in current interval (807 seconds elapsed):

0 Line Code Violations, 0 P-bit Coding Violation 0 C-bit Coding Violation

0 P-bit Err Secs, 0 P-bit Sev Err Secs

0 Sev Err Framing Secs, 306 Unavailable Secs

500 Line Errored Secs, 0 C-bit Errored Secs, 0 C-bit Sev Err Secs Data in Interval 1:

0 Line Code Violations, 0 P-bit Coding Violation 0 C-bit Coding Violation

0 P-bit Err Secs, 0 P-bit Sev Err Secs

0 Sev Err Framing Secs, 0 Unavailable Secs

564 Line Errored Secs, 0 C-bit Errored Secs, 0 C-bit Sev Err Secs Data in Interval 2:

0 Line Code Violations, 0 P-bit Coding Violation 0 C-bit Coding Violation

0 P-bit Err Secs, 0 P-bit Sev Err Secs

0 Sev Err Framing Secs, 0 Unavailable Secs

564 Line Errored Secs, 0 C-bit Errored Secs, 0 C-bit Sev Err Secs Data in Interval 3:

0 Line Code Violations, 0 P-bit Coding Violation 0 C-bit Coding Violation

0 P-bit Err Secs, 0 P-bit Sev Err Secs

0 Sev Err Framing Secs, 0 Unavailable Secs

562 Line Errored Secs, 0 C-bit Errored Secs, 0 C-bit Sev Err Secs Data in Interval 4:

0 Line Code Violations, 0 P-bit Coding Violation 0 C-bit Coding Violation

0 P-bit Err Secs, 0 P-bit Sev Err Secs

0 Sev Err Framing Secs, 0 Unavailable Secs

560 Line Errored Secs, 0 C-bit Errored Secs, 0 C-bit Sev Err Secs

.

.

.

Total Data (last 44 15 minute intervals):

			0	Line Code Violations, 0	P-bit Coding Violation,
			0	C-bit Coding Violation,
			0	P-bit Err Secs, 0 P-bit Sev Err Secs,
			0	Sev Err Framing Secs, 0	Unavailable Secs,
			24750 Line Errored Secs, 0 C-bit Errored Secs, 0 C-bit Sev Err Secs
		Transmitter is sending AIS.
		Receiver has loss of signal.
		40434 Sev Err Line Secs, 0			Far-End Err Secs, 0 Far-End Sev Err Secs
0			P-bit Unavailable Secs, 0 CP-bit Unavailable Secs
0			CP-bit Far-end Unavailable Secs
0			Near-end path failures, 0 Far-end path failures
		Cisco 7304 Router Modular Services Card and Shared Port Adapter Software Configuration Guide
	13-18				OL-4807-02