Chapter 3 MIB Specifications

CISCO-BGP-POLICY-ACCOUNTING-MIB

Table 3-4

CISCO-BCP-MIB Constraints (continued)

 

 

 

MIB Object

 

Notes

bcpConfigMacSupport

Read-only. Possible values: enabled(1), disabled(2)

bcpConfigTinygram

Read-only. Possible values: enabled(1), disabled(2)

bcpConfigMacAddressControl

Read-only. Possible values: enabled(1), disabled(2)

bcpConfigSpanTreeControl

Read-only. Possible values: enabled(1), disabled(2)

bcpConfigIeee802dot1qTagged

Read-only. Possible values: enabled(1), disabled(2)

bcpConfigMgmtInline

Read-only. Possible values: enabled(1), disabled(2)

bcpConfigBCPacketIndicator

Read-only. Possible values: enabled(1), disabled(2)

bcpConfigBridgeId

Read-only.

bcpConfigLineId

Read-only.

bcpConfigMacType

Read-only.

bcpConfigMacAddress

Read-only.

bcpConfigSpanTree

Read-only.

1bcpConfigTable objects are defined as read-write; but they are implemented as READ-ONLY.

2The CISCO-BCP-MIB supports interfaces configured with bridge-enabled only, which means if no “bridge-enable” is configured,there is no entry for this interface when the user pulled the bcpOperTable or bcpConfigTable by SNMP.

CISCO-BGP-POLICY-ACCOUNTING-MIB

The CISCO-BGP-POLICY-ACCOUNTING-MIB contains BGP policy-based accounting information (such as ingress traffic on an interface), which can be used for billing purposes. The MIB provides support for BGP Policy Accounting, which enables you to classify IP traffic into different classes and to maintain statistics for each traffic class.

The MIB contains counts of the number of bytes and packets of each traffic type on each input interface. This information can be used to charge customers according to the route that their traffic travels.

CISCO-BGP4-MIB

The BGP4-MIB provides access to information related to the implementation of the Border Gateway Protocol (BGP). The MIB provides:

BGP configuration information

Information about BGP peers and messages exchanged with them

Information about advertised networks

CISCO-BSC-MIB

The CISCO-BSC-MIB contains objects to manage binary synchronous communications (BSC) on the router, including BSC ports (serial interfaces) and BSC control units (stations on a port).

Cisco 7304 Router MIB Specifications Guide

 

OL-4925-02

3-7

 

 

 

Page 7
Image 7
Cisco Systems 7304 specifications Cisco-Bgp-Policy-Accounting-Mib, CISCO-BGP4-MIB, Cisco-Bsc-Mib