Initializing and Testing the System

Programming Guides

Programming Summary for quick-reference procedures Document Number 555-620-144

System Programming for detailed procedures Document Number 555-620-111

System Programming and Maintenance (SPM) for detailed SPM procedures

Document Number 555-620-142

Restoring from the System Programming

Diskette

If you received the Release 2.0 system programming diskette, follow the procedure in this section to initialize the system.

1.Perform a System Erase:

Menu Maintenance Slot 00 Enter Demand Test System Erase (Line 5, left button) twice Yes

See the Maintenance and Troubleshooting guide for additional information on System Erase.

2.Use the system programming diskette to perform the Restore procedure from the PC via SPM.

See the System Programming and Maintenance (SPM) guide for instructions.

NOTE:

The system must be restored from the system programming diskette (or a backup diskette) whenever a frigid start (System Erase) occurs.

7-2Initializing the System

Page 279
Image 279
AT&T Release 2.0 manual Programming Guides, Restoring from the System Programming Diskette