Installing the PC, CAT, or Printer

5

 

 

 

Once you have completed all installation procedures as described in the previous chapters, you can connect an Station Management Detail Record (SMDR) or Call Accounting Terminal (CAT) printer and a personal computer (PC), or a CAT and CAT printer, to the system.

Connecting a PC to the Control Unit

A PC with MS-DOS 3.3 or higher and SPM 2.xx or higher can be used for SMDR, system programming, and maintenance. The connection of the PC to the control unit depends on the distance between them:

If the PC is within 50 ft (15 m) of the control unit, follow the procedure in the section, “Connecting a PC (Within 50 Feet).”

If the PC is more than 50 ft (15 m) from the control unit, follow the procedure in the section, “Connecting a PC (50 Feet or More).”

Connecting a PC to the Control Unit 5-1

Page 220
Image 220
AT&T Release 2.0 manual Installing the PC, CAT, or Printer, Connecting a PC to the Control Unit