AT&T Release 2.0 manual Removing the Extension Label

Installing Telephones and Adjuncts

4.Label the extension identification card.

a. Insert a straightened paper clip into the hole on the side of the plastic cover while holding your finger on the opposite edge. Use the paper clip to push and lift the cover. See Figure 3-15.

Figure 3-15. Removing the Extension Label

b.Type or write the assigned extension number on the card. See Figure 3-16.

5 5 5 - 1 2 3 4

Figure 3-16. Labeling the Extension

3-38Assembling the MLX Telephone