Use only AT&T-manufactured MERLIN LEGEND™ Communications System circuit modules, carrier assemblies, and power units in the MERLIN LEGEND Communications System (511A) control unit.

Use only AT&T-recommended/approved MERLIN LEGEND Communications System accessories.

If equipment connected to the analog station modules (008, 408, 408 GS/LS) or to the MLX telephone modules (008 MLX, 408 GS/LS- MLX) is to be used for in-range out-of-building (IROB) applications, IROB protectors are required.

Do not install this product near water, for example, in a wet basement location.

Do not overload wall outlets, as this can result in the risk of fire or electrical shock.

The MERLIN LEGEND Communications System is equipped with a three-wire grounding-type plug with a third (grounding) pin. This plug will fit only into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician to replace the obsolete outlet. Do not defeat the safety purpose of the grounding plug.

The MERLIN LEGEND Communications System requires a supplementary ground.

Do not attach the power supply cord to building surfaces. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it.

Slots and openings in the module housings are provided for ventilation. To protect this equipment from overheating, do not block these openings.

Never push objects of any kind into this product through module openings or expansion slots, as they may touch dangerous voltage points or short out parts, which could result in a risk of fire or electrical shock. Never spill liquid of any kind on this product.

Unplug the product from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use cleaners or aerosol cleaners.

xvi

Page 18
Image 18
AT&T Release 2.0 manual Xvi