AT&T Release 2.0 manual Testing the DSS, Testing the Night Service

Initializing and Testing the System

Testing the DSS

At each Direct Station Selector (DSS), check that all lights are operational. Using the DSS, call a telephone in the system. Test that the page buttons on the DSS work properly.

Testing the Night Service

Follow these steps to test the Night Service feature on the system operator console:

1 . At the system operator console, press the Night Service button. If the Night Service with Outward Restriction option is programmed, you will need to enter the assigned password after pressing the Night Service button.

The Night Service LED turns on.

NOTE:

Night Service on a DLC can also be activated by pressing Feature and dialing 39.

2 . Pick up the handset and press a button for any outside trunk.

3 . Dial the number of an operator console that is programmed to receive Night Service coverage.

4 . Verify that the telephones assigned to the Night Service group are ringing.

5 . Have someone pick up the handset at a telephone in the Night Service group; verify that you have good two-way communication.

6 . At both telephones, hang up.

7 . Repeat Steps 2 through 5 for each operator console that is programmed to receive Night Service coverage.

7-26Testing the System