AT&T Release 2.0 manual Connecting a CAT and Printer on the Same AC Outlet, Hardware

Installing the PC, CAT, or Printer

CAUTION:

To prevent damage from electrostatic discharge (ESD), avoid touching leads, connectors, pins, and other components. Use a properly grounded wrist strap.

Connecting a CAT and Printer on the Same

AC Outlet

If the printer is an AT&T CAT serial printer and is plugged into the same AC outlet as the control unit and CAT, and the CAT is less than 14 ft (4.27 m) and the printer is less than 50 ft ( 15 m) from the control unit, use the hardware and procedures in this section.

Hardware

■Z200A EMI filter

■D8W cord

■355A Adapter

Connecting a Printer to the Control Unit 5-9