AT&T Release 2.0 manual Initializing and Testing System, Initializing the System

Initializing and Testing the	7
System

When you have finished installation, you are ready to initialize the system as described in this chapter.

Initializing the System

Use one of the following methods to initialize a Release 2.0 system:

■Restore from a 2.0 system programming diskette.

■Upgrade from Release 1.0 or 1.1 to 2.0 as described in this chapter.

■Follow the system programming forms and use the procedures from one of the programming guides listed in the next section, “Programming Guides.”

NOTE:

Make sure that you perform a System Erase immediately before restoring from a diskette or programming the system on initial installation. Failure to perform the System Erase could result in inappropriate programming.

Initializing the System 7-1